Cables And Connectors - SKP Pro Audio SK-6P El Manual Del Propietario

SK-6P

Cables and Connectors

XLR/F to XLR/M Microphone Cable
TRS (Balanced) 1/4" Phone to XLR/M
TRS (Unbalanced) 1/4" Phone to XLR/M
TS (Unbalanced) 1/4" Phone to XLR/M
XLR/F to RCA (phono) cable
TS (Unbalanced) 1/4" Phone to
(phono) cable
TRS1/4" Phone to dual 1/4" Phone
XLR/F to XLR/M Audio Ground Lift
XLR/F to XLR/M Microphone Cable
TRS (Balanced) 1/4" Phone to XLR/M Cable
TRS (Unbalanced) 1/4" Phone to XLR/M Cable
TS (Unbalanced) 1/4" Phone to XLR/M Cable
XLR/F to RCA (phono) cable
TS (Unbalanced) 1/4" Phone to (phono) cable
TRS1/4" Phone to dual 1/4" Phone
XLR/F to XLR/M Audio Ground Lift
The standard cable for interconnection of microphone and line level signal in professional audio systems.
Microphone to mixer
Microphone to SK-6P INPUT 1
Professional audio mixer to SK-6P INPUT 1
"Daisy chaining" SK-6P speaker systems
For connecting balanced devices with 1/4" connector to SK-6P XLR input.
For connection of instruments with unbalanced outputs to balanced XLR input .
Sources (signal processors, electronic instruments) with 1/4" unbalanced outputs to ,processors,
and powered speakers with balanced XLR/F inputs.
This cable is electrically identical to "TRS(unbalancad) 1/4" Phone to XLR/M
above and may be used interchangeably.
Connects consumer audio products and some DJ mixer outputs to professional audio equipment inputs.
Connects outputs of consumer audio equipment to unbalanced line inputs of SK-6P and mixers
Connects unbalanced line outputs to many mixers to the inputs of consumer audio recorder.
Splits a stereo output into separate left/right signals.
Connects stereo electric guitar to two unbalanced audio inputs.
Connects a headphone output to two unbalanced audio inputs.
Change to a TRS mini-phone to connect to the output of portable CD players and computer sound cards
to a mixer or powered speakers.
Also used to connect signal processors to the "insert" of many mixing consoles.
Used to "telescope" a ground to eliminate hum caused by "ground loops". For use only with balanced
inputs and outputs.
Ring
Sleevee
Ring
Sleevee
Sleevee
Sleevee
Ring
Sleevee
10
REFERENCE
1
1 (shield)
2
2
3
3
Tip
1 (shield)
2
3
Tip 1 (shield)
2
3
Tip
1 (shield)
2
3
1
2
3
Tip
Tip
1 1 (no connection)
2 2
3 3
Center
Shield
Center
Sleeve (shield)
Tip
Sleeve (shield)
Tip
Sleeve (shield)