Error Messages; Error Display - Knick Stratos Eco 2405 Oxy Inicio Rápido

Error Messages

Error Display
ERR 01
Measured
value
blinks
ERR 02
Measured
value
blinks
ERR 98
"Conf"
blinks
ERR 99
"FAIL"
blinks
12
Problem
Possible causes
SAT range
• Sensor defective
• Wrong sensor connected
• Measurement range exceeded
Conc range
• Sensor defective
• Wrong sensor connected
• Measurement range exceeded
System error
Configuration or calibration data defec-
tive; completely reconfigure the device
using the factory settings. Then calibrate.
Memory error in device program
Factory settings
EEPROM or RAM defective
This error message only occurs in the
case of a total defect. The device must be
repaired and recalibrated at the factory.
x x x
x x x
x x x x
x x x x