4. Display messages
Introductory message that appears when turn the equipment ON.
The equipment is ready to start a measurement, thus the operator has to
press the Start
button.
The equipment is adjusting the parameters to optimize the readings.
It shows that the test current is not enough to carry out the reading. The
operator needs to rotate the test current
It indicates that the measured resistance is higher than the maximum
value readable in the selected range.
MO-2Ke
PRESS START
WAIT...
LOW CURRENT
OVERRANGE
άάάάάάάάάάάάάΫ
13
00:01
control clockwise.
00:02