Battery Charger - TENTECH MO2Ke Manual De Uso

8.3. Battery charger

This equipment has an internal battery charger with a smart,
microprocessor-controlled circuit, which adjusts the battery charge to the
optimized parameters to ensure the maximum service life. It is supplied
by mains of 220 - 240 V∼.
Check that the On/Off key
•
Connect the equipment to the mains supply.
•
The battery key led
•
completing the charge. At that point, it will change to a green light,
being like this up to the equipment disconnection from the mains
supply. If, during the battery charge, the equipment is turned ON,
the charge will be momentarily interrupted, returning to the charge
process once the equipment is turned OFF.
ATTENTION: MO-2Ke has internal filter optimized for mains of 220 -
240 V~ 60 Hz 40 VA
Before starting with the measurements, be sure that the battery is
well charged. If during a measurement the battery charge
achieves a critical level, the equipment will automatic turn OFF.
is in OFF.
will keep on lightning with a red light up to
WARNING
17