Performing A Blood Glucose Test - NURSE ROSIE RealTime Manual Del Propietário

Performing a Blood Glucose Test

2. Select the appropriate measuring mode by pressing M
For selecting the measurement mode, please refer to the "FOUR
MEASURING MODES" section.
24
1. Insert the test strip to turn on the
meter
Wait for the meter to display "
and " ".
3. Obtaining a blood sample
Use the pre-set lancing device to
puncture the desired site. Wipe off the
first appeared drop of blood with a clean
cotton swab. The size of the drop should
be at least as big as (actual size), which
is 0.5 microliter (μL) of volume. Gently
squeeze the punctured area to obtain
another drop of blood. Be careful NOT to
smear the blood sample.
4. Apply the sample
Gently apply the drop of blood to the
absorbent hole of the test strip at a tilted
angle. Confirmation window should be
completely filled if enough blood sample
has been applied. Do NOT remove your
finger until you hear a beep sound.
"