Downloading The Results - NURSE ROSIE RealTime Manual Del Propietário

Downloading the Results

Data Transmission Via Bluetooth
You can transmit your measurement data from the meter to an App on
your mobile device via Bluetooth signal. Please note that you must first
pair your meter to your mobile device before attempting to transmit any
data. Please contact customer service or the place of purchase for
further assistance.
Pairing with your mobile device
1. Press and release the M to enter the memory mode
Press M several times until the screen display "OFF" and then the
Bluetooth indicator will flash.
2. On your mobile device, turn on the Bluetooth function and follow
the instruction on the App to pair the device (e.g., Search for meter,
and Pair).
3. After successfully pairing the App to your meter, the Bluetooth function
on the meter will then start to transmit the data to your App.
Bluetooth indicator on the meter
BLUETOOTH INDICATOR
Flashing Blue
Solid Blue
NOTE:
• While the meter is in transmission mode, it will be unable to perform a test.
• Make sure that your Bluetooth enabled device has turned on the Bluetooth
signal prior to transmitting the data, and that the meter is within range.
• For OS version requirements please refer to the app description on the Apple
App Store or Google Play Store.
• A compatibility issue between your mobile device and the meter might occur
due to the way Bluetooth functionality is implemented by the various mobile
device manufacturers.
STATUS
The Bluetooth function is enabled and
waiting for connection.
The Bluetooth connection is established.
29