Installing The Car Seat Without The Base - Peg-Perego PRIMO VIAGGIO 4-35 NIDO El Manual Del Propietario

Installing the Car Seat without the Base

Important! The base is designed to avoid consumer misuse by reducing the number
of times the seat must be anchored to your vehicle. Please, use and install this car seat
without the base only if needed.
Make sure that your vehicle is parked on
level ground when you install the seat.
Position the restraint with the child in it
on the seat, so that your child is facing
the rear of the vehicle. Adjust the handle
in the forward most position as shown
(a). Any other position may injure your
baby in an accident. To move the handle,
press the gray buttons on the side of the
handle at the same time and rotate the
handle.
Important! The seat must be parallel to
the ground. Use the line drawn on the
product as a reference: the line must be
horizontal. If necessary, use rolled towels
or pool noodles under the seat at vehicle
seat crease (b).
- 39 -