Bar And Chain Mounting - Truper PRETUL MOT-4520P Manual Del Usuario

WARNING • Never start the motor without
installing the guide bar first (A), the cutting chain (B) and
the bar guard (C). If these parts are not in place the user
is exposed to severe injuries.
• Set the switch in the OFF position.
• Pull the chain brake backwards (D) to assure it is in
working position (see page 8).
CAUTION • Wear heavy-duty protective gloves to
manipulate the chain safely and prevent cuts.
• Remove the nuts (E) with a 1/2" combination or hex key.
• Remove the bar guard.
• Extend the chain onto a flat and clean surface in an oval
shape, together with the chain bar and straighten any
twisted link. The cutting sprockets shall face the chain
displacement direction, otherwise reverse the chain
position.
• Set the bar onto the mounting bolts in the chainsaw.
• Set the chain linking it onto the cogwheel.
• Set the chain traction sprockets around the bar slot.
10

Bar and Chain Mounting

Cog
wheel
A
B
Straighten
C
Displacement Direction
Cutting
Advancement
sprockets
Traction
sprockets
D
E