Display; Air Direction Adjustment - Kenmore 580.73184 Manual Del Propietário

DISPLAY
- ON/OFF TIMER
- SHUT-OFF TIME
• You will usually use shut-off time while you sleep.
• If unit is running, Timer sets number of hours until shut-off.
• For your sleeping comfort, once Time is set, the Temperature setting
will raise 2"F after 30 min., and once again after another 30min.
• Every time you push Timer button, it advances the Timer setting as
follows: 1 Hour _.2 Hours _ etc. l, 12 Hours maximum.
- START TIME
• If unit is off, Timer sets number of hours before unit starts.
• Every time you push Timer button, it advances the Timer setting as
follows: 1 Hour m, 2 Hours _,etc. I, 12 Hours maximum.
/ DISPLAY COOL/FAN
V TEMP A
_-FAN SPEED
• Everytimeyou push this button,
it willtoggle between
COOL and FAN.
--ENERGY SAVER
• Everytime you push this button,
it advancesthe settingas follows:
{High(F3) _. Low(F1) --, Med(F2)
--, High(F3)}
• The fan stopswhen the compressorstopscooling.
Approximatelyevery 3 minutesthe fan willtum on and
check the room air to determineif coolingis needed.
AIR DIRECTION ADJUSTMENT
VERTICAL AIR DIRECTION CONTROL
The vertical air direction is adjusted by moving the
horizontal louvers up or down with your fingertips.
-- AUTO SWING
• This buttoncan automatically
control the air flow direction
to rightor left.
--REMOTE CONTROL
SIGNAL RECEIVER
• To turn the air conditioner ON,
push the button.
To turn the air conditioner OFF,
push the button again.
• This button takes pdority over
any other button.
• When you first tum it on,
the air conditioner is
on the High cool mode and
the Temp. at 72°F
TEMPERATURE SETTING
• Use this button to automatically
controlthe temperatureof
the room.The temperature
can be set withina range
of 60°F to 86°F by I°F.
-11 -