Samsung FlexWash WV60A9900A Serie Manual De Usuario página 72

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Troubleshooting
Problem
Does not drain and/ or spin.
Drains with noise.
The door does not open.
Excessive suds.
Cannot add additional
detergent.
72
English
Untitled-2 72
• Make sure the drain hose is neither kinked nor obstructed all
the way to the drain system. If there is a drain restriction, call for
service.
• Make sure the debris filter is not clogged.
• Close the door and tap and hold
will not tumble or spin unless the door is closed.
• Make sure the drain hose is not frozen or clogged.
• Make sure the drain hose is connected to a drain system that is
not clogged.
• If the washer is not supplied with sufficient power, the washer
temporarily will not drain or spin. As soon as the washer regains
sufficient power, it will operate normally.
• At the initial installation, or when the washer has not been used
for an extended period of time, the washer may make deflating
noises while draining. This is not a system failure.
• Tap
to stop the washer.
• It may take a few moments for the door lock mechanism to
disengage.
• The door will not open until 3 minutes after the washer has
stopped or the power has been turned off.
• Make sure all the water in the drum or tub is drained.
• The door may not open if water remains in the drum or tub. Drain
the drum or tub and open the door manually.
• Make sure the door lock icon is off. The door lock icon turns off
after the washer has drained.
• Make sure you use the recommended types of detergent.
• Use high efficiency (HE) detergent to prevent oversudsing.
• Reduce the detergent amount for soft water, small loads, or
lightly soiled loads.
• Non-HE detergent is not recommended.
• Do not fill the detergent or fabric softener compartments beyond
the marked max fill limit.
Action
. For your safety, the washer
2021-05-17
2:04:39

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido