Alarms - Pool Technologie DUO UV Instrucciones De Uso

7.7.2. Alarms

All alarms are activated by default.
Any alarm that is activated is immediately displayed on the screen.
To acknowledge an alarm: press the OK or
MESSAGE
DISPLAYED/FAULT
DETECTED
IMMEDIATE AUTOMATIC
ACTION
Stop of Stop of pH
production regulation
No Yes
Yes No
Yes Yes
button (press or press and hold, depending on the alarm).
CAUSE CHECKS AND REMEDIES
pH corrector
Replace
container
container.
empty.
Check that the cell is not
scaled.
Check
necessary,
frequency of the current
Check that the electrical
connections to the terminals
Cell problem.
of the cell are sufficiently
tight and not oxidised.
Check that the cell's power
cable is in a good condition.
Check that the cell's power
cable connector is connected
to the electronics unit.
As a last resort, replace the
cell.
Check that:
The flow sensor is properly
connected to the electronics
unit.
The flow sensor is activated
Insufficient
water flow
The valves on the filtration
through the
circuit are open.
filtration
The filter pump is working
circuit.
properly.
The filtration circuit is not
blocked.
There is enough water in the
pool.
the pH corrector
and adjust, if
the reversal
OPTION TO
DISABLE VIA
menu
Yes
No
No
19