AneX Classic Manual De Uso página 13

PERAMBULATOR
ASSEMBLING / DISASSEMBLING
To unfold the perambulator's frame, you should put
it in a horizontal position and then pull upwards
vigorously till the system is secured, while holding the
handle (you should hear a specific sound) (fig. 1, 2);
To fold the frame, pull its lever up, then pull the lock
against accidental folding (about 2cm) till it unlocks (fig.
4,3). Gently push the frame down to the original posi-
tion it had when you were unpacking this perambulator.
HANDLE HEIGHT ADJUSTMENT
Simultaneously press the round buttons, placed in
parallel on both sides of the handle. Set a comfortable
handle height for you (fig. 5).
WHEEL MOUNTING / DISMOUNTING
To dismount a wheel, press at its midpoint and pull
along the axis pin till it comes off completely (fig. 6);
To mount a wheel, press the wheel's center button,
then push it along the axis pin till it stops, release the
button and gently push until locking (fig. 6).
BRAKE
This perambulator features a parking brake. To stop
this perambulator, you must press the pedal blocking
rear wheels. To continue moving along, you need to
reset the pedal (fig. 7).
SHOCK ABSORPTION
This perambulator's frame features a
shock-absorbing system, ensuring your baby's com-
fort (fig. 8).
PORTABLE CRADLE
MOUNTING / DISMOUNTING
To mount the portable cradle place the adapters into
the adapter pockets, located on the frame's inner side
(fig. 19). The portable cradle adapters are blocked
automatically.To dismount the portable cradle, press
the buttons of the portable cradle adapters, while
lifting it up (fig. 19). If necessary, the portable cradle's
inner part can be removed and washed (fig. 12, 13).
The portable cradle's backrest covered by a coconut
mattress (fig. 15) can be adjusted using a rear regula-
tor that should be turned several times till the desired
height is reached (fig. 14).
Thanks to the portable cradle's unique shape a child
can be easily swung. It also features stoppers for
fixation in an immobilized position (fig. 16).
The portable cradle features a ventilation
system (fig. 17).
FOLDABLE HOOD, FEET COVER
TThis perambulator features a comfortable foldable
hood protecting a child from the elements (wind, sun,
snow, rain). Hood position is adjusted using the red
button at its bottom (fig. 9, 24);
This perambulator features an additional handle for
carrying the portable cradle (fig. 18);
This perambulator features a feet cover, which is put
on in the portable cradle's front and secured with
buttons on both sides (fig. 19);
PRE-USE PROCEDURES
This perambulator's hood can be ventilated by unfas-
tening a zipper on the roof and untucking the bottom
part (fig. 10);
This perambulator features an anti-mosquito protec-
tion (fig. 11);
This perambulator features a rain protection system
matching both the portable cradle and the seat unit
(fig. 30, 31).
FOLDABLE HOOD
MOUNTING / DISMOUNTING
To relocate the hood from the portable cradle to the
seat unit's part, you must detach its interior zipper fas-
tening the hood to the portable cradle, then relocate it
on the seat unit and fasten the zipper on a metal hoop
(fig. 20, 21);
Remove the lower narrow part of the hood and fasten
the one designed for the seat unit (fig. 22).
SEAT UNIT MOUNTING / DISMOUNTING
To mount the seat unit, place the adapters into the
adapter pockets located on the frame's inner
side (fig. 23).
The seat unit's adapters are blocked automatically;
To dismount the seat unit, press the buttons of the
seat unit's adapters, while lifting it up (fig. 23).
The seat unit features a feet cover, which is secured
with buttons on both sides at the front of this peram-
bulator (fig. 27).
FOOTREST ADJUSTMENT
For adjusting to a desired height, simultaneously
press the buttons located in front of each other on
both sides of the footrest (fig. 25).
SEAT UNIT'S PROTECTIVE HANDLE
Every seat unit features a bumper with a protective
mechanism preventing a child from getting out of this
perambulator;
For dismounting the bumper, press the buttons and
gently pull the handle up (fig. 26);
For mounting the bumper, insert it into the latching
mechanisms of the holders, located on both sides of
the seat unit.
SAFETY BELTS
The seat unit features 5-point safety belts (fig. 28);
To secure a child with protective belts, insert the safety
belt locks into the grabber and tighten those belts
(fig. 29), check if they are secured (fig. 27);
To unfasten the belts, press the button and remove
the locks out of the grabber (fig. 29).
CHILD SAFETY SEAT
The child safety seat can be mounted on this peram-
bulator's frame as well (fig. 33).
To secure the removable child safety seat, insert
the adapters into the adapter pockets (fig. 32),
then secure it (fig. 33).
The adapters are blocked automatically;
The child safety seat's latching mechanisms must be
attached to tailor-made adapters (fig. 32).
The child safety seat features a feet cover fastened
EN
13