Metabo HPT M 1808DA Instrucciones De Seguridad Y Manual De Instrucciones página 15

Base ass'y
Screw
When using the trimmer along the interior plane of
the template, the dimensions of the fi nished product
will be less than the dimensions of the template by
an amount equal to dimension "B", the diff erence
between the radius of the template guide and the
radius of the bit. The reverse is true when using the
trimmer along the exterior of the template. (Fig. 16)
Template guide
Base ass'y
Secure the template to the workpiece. Feed the
trimmer in the manner that the template guide moves
along the template as shown in Fig. 17.
Template
<Trimmer guide>
The guide is handy when used in processing of
materials such as trimming and beveling of plywood.
(1) Fit the trimmer guide on the base ass'y with knob bolt
(B).
(2) Loosen knob bolt (B) to move the trimmer guide up
and down.
(3) Loosen knob bolt (C) and turn the stop screw to move
the guide pin. (Fig. 18)
After moving the guide pin, tighten knob bolt (C) to
secure it.
Lock lever
Template guide
Fig. 15
Bit
Template
B
Fig. 16
Fig. 17
Guide pin
Knob bolt (C)
(4) As shown in Fig. 19, securely attach the bottom of
the base ass'y to processed surface of the materials.
Feed the trimmer with the guide pin alongside the
material.
Body feed direction
<Straight guide>
○ It is handy when used for linear processing work such
as beveling, grooving and the like.
(1) Fit the straight guide with knob bolt (B) on the base
ass'y and fi x it.
(2) Adjust the length "C" from the bit to the surface of
straight guide by loosening the wing nut and moving
the straight guide as necessary. (Fig. 20)
Knob bolt (B)
Straight guide
Washer (A)
Knob bolt (B)
C
Straight guide
English
Washer (A)
Knob bolt (B)
Stop screw
Trimmer guide
Fig. 18
Trimmer guide
Fig. 19
Guide holder
Bolt
Wing nut
Wing nut
Loosen
Tighten
Fig. 20
15