Markings On The Product; Use - TEUFELBERGER FORIS Instrucciones De Uso Y Mantenimiento

GENERAL / USE

MARKINGS ON THE PRODUCT

Product name
Rope type: Single rope, used individually
EN 892: Number of the relevant european norm for mountaineering ropes
CE 0408: Four-digit code identifying the certifying institute
UIAA certified
Ser. Nr.: The last two digits tell the year of manufacture.
Length in meters
Manufacturer
Year of manufacture is denoted by the coloured threads in the rope core.
Diameter: 10 mm
UIAA Falls: ≥7
Weight: 67 g/m
Impact Force at first fall: ≤9 kN

USE

Although the UIAA and CE assures the highest testing standards, it is important to practice in-
telligent protection techniques to minimize the chances of rope breakage. Consider protection
and runner length carefully to prevent ropes from running over sharp edges. Stones falling onto
the rope or people stepping on it significantly shorten the lifespan It is the responsibility of the
climber to behave according to the prevailing situation.
Warnung: During routine use, the rope may schrink!
This product is designed for rock climbing and mountaineering only. A single rope is a dynamic
climbing rope, which is easier to use as part of a safety chain in a position to absorb the fall of
WARNING
The use of our products can be dangerous. Our products may only be used for their intended
purpose. They must particularly not be used for lifting as specified in EU directive 2006/42/EC.
The customer is responsible that the user has been trained in the safe use of the product and
in accompanying safety precautions. Be aware of the fact that the product can cause damage if
wrongly used, stored, cleaned or overloaded. Check national safety regulations, industry recom-
mendations and standards for local requirements.
TEUFELBERGER and 拖飞宝
®
8
are internationally registered trademarks of the TEUFELBERGER group.
®
Sheath Slippage: ≤15 mm
Static elongation: ≤8 %
Dynamic elongation: ≤39 %