Device Controls And Indicators; Storage, Handling And Removal Instructions; Storage And Handling; Removal Instruction - AMATECH F-ABSLALM Instrucciones De Uso

INSTRUCTIONS FOR USE
To adjust the
c.
angulation SIMPLY LIFT UP ON THE END
OF THE BOARD and move it in the
desired direction. Lower the end of the
Armboard and the weight of the arm will
lock the board in position. Do not apply
excessive force when lifting the end of
the Armboard. Only 2 - 3 lbs (0.9 – 1.4 kg)
of such force should be required to
disengage the lock mechanism during
repositioning. Extreme upward forces
could damage the Armboard.
Be careful not to install the Armboard at a table section articulation level. the
Armboard could be damaged in case of movement.

3.3 Device controls and indicators:

Controls and indicators of this device are described within the Setup instructions.

3.4 Storage, Handling and Removal Instructions:

3.4.1

Storage and Handling:

The product should be stored in a clean and safe environment to prevent product
damage.
3.4.2

Removal Instruction:

a. Grasp the end of the Armboard with one hand. With the other hand lift the
latch handle.
b. Lift the end of the board up and pull the Armboard away from the rail.

3.5 Troubleshooting Guide:

This device does not have a troubleshooting guide. For technical support users of
the device shall first contact their supplier
Document Number: 80028289
Version: B
Armboards radial
Page 13
Issue Date: 18 MAR 2020
Ref Blank Template: 80025118 Ver. E