Led On Charger - Cramer 82VH860 Manual Del Usuario

2. Connect the battery with the adapter, then insert the adapter (1) into
EN
the charger (2).
LED On Battery
Press the battery capacity indicator (BCI) button. The Power LED
Indicator lights will illuminate according to the batteries capacity level
and the Bluetooth LED Indicator light will indicate bluetooth function.
The Fault LED Indicator light will present faults.
The words showing the current battery capacity will be blinking.
NOTE: After press the BCI button, the bluetooth light will flash blue
about 30 seconds. If the battery pack has been connected with the app,
the blue light will stay on. In parallel to activating the battery, make sure
to activate bluetooth on your smart phone. If the connect time is more
than 15 seconds, please repress the BCI button to activate the battery
again and make sure the smart phone is ready to connect.

LED On Charger

see figure 3.
These are diagnostic chargers. The Charger LED Light (1) will illuminate
in specific order to communicate the current battery status. They are as
follows:
LED STATUS
Blinking Green
8
cramer.eu
DESCRIPTION
Charging
Solid Green
Solid Red
Blinking Red
The charge time is dependent on a number of factors, including battery
condition, ambient temperature, etc., and may therefore vary from the
charge time in the "specifications" .
The battery warms up during operation. If a warm battery is inserted in
the charger, it may be necessary to cool it down before charging. The
charging process begins only after the battery has cooled down. The
time required for cooling may prolong the charge time.
Connecting Your Battery With GreenFleet app
The App is designed to bring extra value to you as a user. Down load
the app and explore how GreenF The APP is governed by separate
terms and conditions available for viewing through the mobile
application. Download the application at:
IOS
Fully Charged
Over Temperature
Charging Fault
Android