Cramer 82VH860 Manual Del Usuario página 7

Operation
Transporting the Battery
• Disconnect the battery from the power tool – even when carrying
it for short distances. This avoids the risk of accidental startup.
• Carry the battery by the handle or on your back. In vehicles:
Properly secure the battery to prevent turnover and damage.
WARNING!
Special precautions must be taken when transporting a
damaged or malfunctioning battery. To reduce the risk of
accidents, always contact your CRAMER servicing dealer
before transporting such a battery.
Connecting the Adapter
see figure 4.
1.Insert the plug (1) of one side into the socket (2) of the battery – line
up the lugs on the plug with the slots in the socket.
2.Push the plug into the socket until it stops, then turn it clockwise until
the plug's latch (3) engages.
3.Fit cable (4) into the cable duct (5) and wind through the housing –
see also "Positioning the Cable" .
NOTE: The other side of the cable is fixed on the adapter.
Positioning the Cable
see figure 4.
1.The cable can be fitted in different cable ducts depending on whether
the power tool is being operated next to or behind the user.
2.Fit the cable in one of the lateral cable ducts and push it into place.
3.Always use the cable outlets at the side on which the power tool is
held and controlled.
4.If the cable is too long, attach it to the retainer on the bag.
WARNING!
To reduce the risk of accidents, never lay the cable
diagonally – it may snag on objects.
Before Starting Work
Check that the battery is in good condition.
•
Check condition of housing parts.
• Check condition of straps.
•
Make sure cable, plug and adapter are not damaged.
•
Depress push button to activate the LED display.
• When push button, acoustic signal should beep.
Do not continue using the battery if parts of housing or straps are
worn, cracked or broken – contact CRAMER servicing dealer.
EN
5
cramer.eu