Problem Solving - Clarity EHA40 Manual

Volume control (see
The volume control button
the volume of the voice of the person at the other
end of the line. If you want to increase the volume,
slide the button upwards.
To lower the volume, slide the button downwards.
Clarity Power™ technology ensures that only the
high tones are amplified. This technology not only
makes calls louder, but also easier to understand.
Warning:
•
If the Boost function
F
•
volume control is not at the 'normal' position the
H
volume may be extra loud and in excess of 118dB.
This mode is intended specifically for hearing
impaired users and could be harmful to other users.
The volume should be increased gradually to find the
minimum level of amplification that is comfortable
for you. Avoid prolonged or unnecessary exposure to
high volume levels.
8
•
)
H
•
H enables you to adjust
is switched on and/or the

Problem Solving

(solving problems yourself)
If you have problems, always check first whether:
1) all flexes are connected correctly;
2) the batteries are installed correctly or
whether they need to be replaced.
To check whether the problems are caused by
the amplifier, plug the telephone handset
directly into the telephone again, without the
amplifier in between. If this solves the problem,
it could be caused by the amplifier. If the
problem is not solved, it may be due to the
telephone or telephone line. In this case, contact
the manufacturer of the telephone or your
telephone company.
GB
9