HAMPTON BAY 91344 Guía De Uso Y Mantenimiento página 11

Assembly - Attaching the Fan Blades
1
Attaching the fan blades
NOTE: Your fan blades are reversible. Select the blade
side finish which best accentuates you decor.
□
Attach blade (G) to blade bracket (H) using the screws (AA)
provided. Please note that the rubber washers are pre-
attached to the blade bracket (H). Insert a screw (AA) into
the blade bracket (H). Repeat for the two remaining screws
(AA).
□
Tighten each screw (AA) securely.
□
Repeat above steps for the remaining blades.
2
Attaching the fan blade assembly
to motor
□
Fasten the blade assembly (H) to the motor (D) by inserting
the alignment post into the slot on the bottom of the motor
(D) and tighten the motor screws. Please note that the motor
screws are pre-attached into the blade bracket.
Assembly - Attaching the Light Kit
1
Attaching the light kit
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light kit.
□
Remove the three screws (QQ) from the black bracket below
the fan motor assembly (D).
□
Connect the wires from the light kit fitter assembly (E) to the
wires from the black bracket below the fan motor assembly
(D) by connecting the molded adaptor plugs (SS) together.
Carefully tuck all wires and splices in the switch cup of light
kit fitter assembly (E).
□
Position the light kit fitter assembly (E) on the black bracket
below the fan motor assembly (D) and align the three holes
in the black bracket.
□
Re-install the three screws (QQ) removed in the the first
step to secure the light kit fitter assembly (E).
G
D
SS
QQ
11
Please contact 1-855-HD-HAMPTON for further assistance.
AA
D
H
G
E
HAMPTONBAY.COM
H