TACKLIFE RPRS01A Manual Del Usuario página 5

d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool. Power tools are dangerous in the hands
of untrained users.
e) Maintain power tools. Check for misalignment or sticking of moving parts, breakage of parts
and any other condition that may affect the power tool's operation. If damaged, have the power
tool repaired before use. Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the power
tool for operations different from those intended could result in a hazardous situation.
5. Service:
a) Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
Safety Instructions for Reciprocating Saw
When using electric tools, basic safety precautions should always be followed to reduce the risk of fire,
electric shock and personal injury. Read all these instructions before attempting to operate this product and
save these instructions.
The machine must not be damp and must not be operated in a wet environment. Always inspect the cable
and plug before using machine. Only have damage repaired by a qualified professional. Only insert the plug
into the mains socket when the machine is switched off. Wear protective gloves and sturdy footwear.
WARNING! Do not saw materials containing asbestos!!!
● Hold power tool by insulated gripping surfaces, when performing an operation where the cutting
accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live" wire may
make exposed metal parts of the power tool "live" and could give the operator an electric shock.
● It is recommended that the tool always be supplied via a residual current device with a rated residual
current of 30 mA or less.
● If the replacement of the supply cord is necessary, this has to be done by the manufacturer or a
qualified agent in order to avoid a safety hazard.
● Wear protective eye goggles and a protective mask when working with materials which produce large
amounts of chips or dust.
● Wear a protective mask when sawing other fibrous materials.
● Lock the shoe adjustment lever in place before turning the tool on.
● Secure your workpiece with clamps. Always lead the power cable away from the machine towards
the rear.
● Only move machine towards the workpiece when switched on.
● Always hold machine with both hands and ensure that you have a safe footing while working.
● Always remove the plug from the mains socket before carrying out any work on the machine.
● Incorrect handling may damage the machine. Therefore always comply with these instructions.
● Use only sharp saw blades which are in perfect condition; replace cracked, distorted or blunt saw blades
immediately.
- 03 -