TACKLIFE RPRS01A Manual Del Usuario página 7

1.
Open the Blade Clamp (3b) by rotating it in an anti–clockwise
direction entirely (Fig.1). This will retract the pin and allow
the saw blade to be inserted.
2. Insert the saw blade into the Chuck (3a) to the deepest
position and release the Blade Clamp (3b) to lock the
blade in position.
3. Carefully pull on the blade to ensure it is securely fastened.
Before plugging in the power cord, always pull
on the blade to make sure it is securely locked
in the blade clamp. Failure to do so may result in
serious injury.
Shoe Adjustment
Always ensure that the saw is switched off and unplugged from the mains power supply
before making any adjustments.
Pull the Locking Lever for Shoe Adjustment (11)
1.
downwards (Fig.2).
Adjust the shoe (2) to the desired position.
2.
3. Secure the shoe (2) in place by raising the Locking Lever
for Shoe Adjustment (11) to the original position.
WARNING! Do not operate the reciprocating
saw if the adjustable shoe is not installed and
fitted correctly.
Rear Handle Adjustment
Ensure the machine is unplugged from the mains power outlet before changing and
fitting a blade.
The rear handle of this tool can be rotated around the
main body of the motor and locked at three different
angles (-90°, 0°, +90°) so that you can operate the tool
in the 6most comfortable position.
1. Push back the Rotating Handle Lock Button (6) to
unlock the rear handle (Fig.3).
2. Turn the rear handle to desired angle and release
the Rotating Handle Lock Button (6) to lock into
desired position.
Turn the rear handle left or right so that it locks at the
3.
nearest preset position with a light click. The rear
handle can only be adjusted to -90°, 0°, 90° angles.
- 05 -
3a 3b
Fig. 1
2
11
Fig. 2
6
Fig. 3