Switching Off; Continuous Operation - TACKLIFE RPRS01A Manual Del Usuario

LED Worklight
When the power cord is plugged into the mains power
outlet, LED Worklight (4) will shine.
This LED Worklight can assist in better vision when
working in darker areas.
The LED Worklight (4) will turn off when the power cord
is disconnected from the mains power supply.
CAUTION! Do not stare directly into the beam of the LED light doing so may damage
your eyes.
Operation
Switching ON & OFF
Make sure that the saw blade does not rest on or touch any objects when the machine is
switched on.
Before using the reciprocating saw, make sure the saw blade and shoe are secured.
Note: The trigger switch of this reciprocating saw features variable speed control.
Switching ON:
1.
Plug the cord set into the mains power outlet.
2. Once you have adjusted the speed of the saw blade,
fully press the trigger switch (10) to operate the
machine.

Switching OFF:

1.
Fully release the trigger switch (10).

Continuous Operation:

1.
To turn ON: Press the Lock-On Button (8) after the Trigger Switch (10) is fully pressed (Fig.6), then remove
2.
your finger off the Trigger Switch (10) – the reciprocating saw will be under continuous running status.
To turn OFF: Fully press the Trigger Switch (10) and the Lock-On Button (8) will spring up back to its
original position, then remove your finger off the Trigger Switch (10).
Operation (Cont.)
General Cutting
1.
Install the Blade and adjust the Shoe for the job.
2.
Press and release the Trigger to ensure that the Lock-On Button is off.
3.
Plug the power cord into a mains power outlet.
4.
Make sure the Blade is clear of any foreign material and the power cord or extension cord are out of the
path of the Blade.
- 06 -
4
Fig. 4
8
7
10
Fig. 6