RIB JOLLY 20/6 Manual Del Usuario página 21

F
LAT SURFACE MOUNTED PUSH BUTTON
OPEN/CLOSE
Control for any type of automation.
It is equipped with two microswitches with contacts 15A 250V.
Dim.: 59,5x82,5x29
K
EY SELECTORS
Control for any type of automation.
Equipped with two microswitches with N.O. contacts of 15A 250V (Open/
Close) and one switch with N.C. contact of 4A 250V (Stop).
The selector can be opened only with the operating key.
IP54
- EMBEDDED WITHOUT STOP dim.: 100x100x109
- TO WALL WITHOUT STOP dim.: 100x100x42
B
LOCK
BLOCK KEY SELECTOR FOR WALL-INSTALLATION
BLOCK KEY SELECTOR TO BUILD-IN
ASSEMBLY ACCESSORIES
C
OUPLE OF HALF BEARING OF REDUCTION
Utilized to mount JOLLY 20/6 motors on shafts of smaller diameter. In
nylon.
- Dim. = Ø 42/60
- Dim. = Ø 48/60
F
IT SLIM
PHOTOCELLS for the wall-installation
PAIR OF COLUMNS FOR FIT SLIM
FIT SLIM photocells have synchronism function in AC current and
code ACG2012 ranges of 20 m.
You can fit many photocell couples close together thanks to the optional
synchronizing circuit SYNCRO TRANSMITTER TX SLIM SYNCRO
code ACG8029 for more than 2 photocells couples (up to 4).
S
PARK
In order to make the systems mentioned above give the best
performances, you need to install an antenna tuned on the frequency
of the radio receiver installed. N.B. Pay attention to not let the central
wire of the cable to came Into contact with the external copper
sheath, since this would prevent the antenna from working.
code ACG1010
Install the antenna vertically and in such a way the remote control can
code ACG1030
reach it.
SPARK BLINKER WITH IN-BUILT INTERMITTENT CARD
LATERAL SUPPORT
SPARK ANTENNA 91
SPARK ANTENNA 433
R
ADIO TRANSMITTER MOON
code ACG1053
code ACG6081
code ACG1048
P
ULLEY ADAPTER
Ø 200 => Ø 220 mm
code ACJ9040
code ACJ9050
1
1
MOON 433
code ACG6082
G
B
code ACG8032
code ACG8065
code ACG7059
code ACG7042
code ACG5454
code ACG5452
MOON CLONE
code ACG6093
code ACJ9055