Predator PUR30WIFI Manual Del Usuario página 13

ON/OFF SWTICH
Plug the power cord into a socket. Switch on the air purifi er using the on/off switch. The
device will begin to work at low speed.
SPEED CONTROL FAN
Control the speed with the speed control. The corresponding indicator light comes on:
-S: sleep mode – low speed, indicator lights and lighting are dimmed
-1: low speed
-2: middle speed
-3: high speed
LIGHTING
The device mood lighting switches on and off alternately. Using the lighting on/off switch,
you can switch off the lighting and the indicator lights. The device will continue to work
at the previously selected settings. Only the on/off switch indicator light will light up
softly.
FILTER
After 2000 hours of use, the fi lter switch indicator light will start to fl ash. Replace the
fi lter, see "cleaning and maintenance > fi lter". Hold the switch for 5 seconds to reset the
switch. The counter will start running again.
IONISATION
The ionization function works automatically when the device is switched on. This function causes the
device to spread negative ions. The impurities in the air become heavy due to this electrical charge and
fall to the ground. Dirty dust particles will no longer fl oat in the air, stopping you from having to breathe
them in.
13
USE
www.glaziar.com / info@glaziar.com