koban KPM3 ENERGY SMART Manual De Instrucciones página 27

Single phase system
5. Operation instructions
5.1 Definition of keys
There are four buttons on the panel, from top to bottom,
Under the measurement interface, press this key to display the same type of electrical
➢
parameters
Under the programming interface :1. Press this key to enter the next menu 2. After the
➢
parameter modification is completed, press this key to confirm the modification and return
to the next menu
3. Exit programming "SAVE" interface, press this key to save the modified parameters
Measure interface: long press this key >1 S, enter the programming menu
➢
Under the programming interface :1, press this key to return to the next menu 2, after the
➢
parameter modification is completed, press this key to abandon the modification and return
to the next menu
3. exit programming "SAVE" interface, press this key to give up saving parameters
Press this key to display different kinds of electrical parameters under the measurement
➢
interface
Under the programming interface :1, press this key to switch to display the same Level of
➢
programming parameters 2, press this key to modify the programming parameters
3