Publicidad
Idiomas disponibles
Idiomas disponibles
FIGURE 1
3. Install vent tube assembly and bracket (from transmission kit) as shown in FIGURE 2. The bracket will be held by the
transmission attachment bolt.
FIGURE 2
4. Push the torque converter forward (remove the torque converter access plug in the bottom of the bell housing) to
seat the converter pilot in the crank bore. Re-install the torque converter access plug, if needed.
Supermatic 10L90 Transmission Installation Kit
ALL INFORMATION WITHIN ABOVE
Date
BORDER TO BE PRINTED EXACTLY
01FE21
AS SHOWN ON 8.5 x 11 WHITE 16
POUND NON-BOND RECYCLABLE
18MR21
PAPER. PRINT ON BOTH SIDES,
EXCLUDING TEMPLATES. TO BE
UNITIZED IN ACCORDANCE WITH
GMCCA SPECIFICATIONS.
REV 18MR21
Revision
Init Rel – Blake Nye
Revision – Blake Nye
11546405 8 Places
24290054 Vent Tube
24284255 Bracket
PART No.
19420811
Auth
DR
Installation Instructions
Title
NA
NA
Supermatic 10L90 Transmission Installation Kit
19420811
PART No.
SHEET
3 of 14
SHEET 3 of 14
Publicidad
