Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Chevrolet Performance Exhaust – Gen 6 Camaro 4 Cylinder (LTG)
Thank you for choosing Chevrolet Performance as your high performance source. Chevrolet Performance is committed to
providing proven, innovative performance technology that is truly.... more than just power. Chevrolet Performance parts are
engineered, developed and tested to exceed your expectations for fit and function. Please refer to our catalog for the Chevrolet
Performance Authorized Center nearest you or visit our website at www.chevroletperformance.com.
It is not the intent of these specifications to replace the comprehensive and detailed service practices explained in the GM
service manuals. For detailed installation instructions please look to the service manual for your specific vehicle.
For information about warranty coverage, please contact your local Chevrolet Performance parts dealer.
Observe all safety precautions and warnings in the service manuals when installing this kit in any vehicle. Wear eye protection
and appropriate protective clothing. Support the vehicle securely with jack stands when working under or around it. Use only
the proper tools. Exercise extreme caution when working with flammable, corrosive, and hazardous liquids and materials. Some
procedures require special equipment and skills. If you do not have the appropriate training, expertise, and tools to perform any
part of this conversion safely, this work should be done by a professional.
The information contained in this publication is presented without any warranty. All the risk for its use is entirely assumed by the
user. Specific component design, mechanical procedures, and the qualifications of individual readers are beyond control of the
publisher, and therefore the publisher disclaims all liability incurred in connection with the use of the information provided in this
publication.
Chevrolet, Chevy, the Chevrolet Bow Tie Emblem, General Motors, and GM are all Registered Trademarks of the General
Motors Corporation.
Chevrolet Performance Exhaust –
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
GM service manuals are available from:
Gen 6 Camaro 4 Cylinder (LTG)
Helm Incorporated
PO Box 07130
Detroit, MI 48207
IR 22MY18
PART NO.
DATE
22MY18
Initial Release - Benjamin Kaminsky
84578425
SHEET
REVISION
1
21
OF
AUTH
N/A

Publicidad

loading

Resumen de contenidos para Chevrolet Performance 84578425

  • Página 1 Chevrolet Performance Exhaust – Gen 6 Camaro 4 Cylinder (LTG) Thank you for choosing Chevrolet Performance as your high performance source. Chevrolet Performance is committed to providing proven, innovative performance technology that is truly..more than just power. Chevrolet Performance parts are engineered, developed and tested to exceed your expectations for fit and function.
  • Página 2 5) 3” Exhaust Clamp (Qnty. 1) 6) 2.25” Exhaust Clamp (Qnty. 3) 7) Chevrolet Performance Emblem (Qnty. 1) – Not Pictured 8) Installation Sheet (Qnty. 1) – Not Pictured Note: Please confirm that all parts are present before beginning the factory exhaust system removal and performance exhaust system installation.
  • Página 3 84578425 IR 22MY18 Gen 6 Camaro 4 Cylinder (LTG) PART NO. Chevrolet Performance Exhaust – SHEET DATE REVISION AUTH ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11 WHITE 16 POUND BOND PAPER.
  • Página 4 6. Mid-Pipe Installation: Install mid-pipe (2) onto Y-pipe (4) with clamp (3). Seat hanger into grommet (1). Do not tighten clamp. 84578425 IR 22MY18 Gen 6 Camaro 4 Cylinder (LTG) PART NO. Chevrolet Performance Exhaust – SHEET DATE REVISION AUTH ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11 WHITE 16 POUND BOND PAPER.
  • Página 5 Note: If vehicle is equipped with the Body Accessory Trim Package (including rear ground effects), please refer to the installation manual of that package for proper mating exhaust ring installation. In addition, if vehicle does have the Body Accessory Trim Package (including rear ground effects), the Chevrolet Performance Exhaust kit without chrome tips should be installed/utilized.
  • Página 6 84578425 IR 22MY18 Gen 6 Camaro 4 Cylinder (LTG) PART NO. Chevrolet Performance Exhaust – SHEET DATE REVISION AUTH ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11 WHITE 16 POUND BOND PAPER.
  • Página 7 This is not a problem and will disappear within a very short period of time after the exhaust has reached normal operating temperature. 84578425 IR 22MY18 Gen 6 Camaro 4 Cylinder (LTG) PART NO. Chevrolet Performance Exhaust – SHEET DATE REVISION AUTH ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11 WHITE 16 POUND BOND PAPER.
  • Página 8 à offrir une technologie de rendement éprouvée et novatrice qui est réellement... beaucoup plus que de la puissance. Les pièces de Chevrolet Performance ont été conçues, élaborées et mises à l'essai de manière à dépasser vos attentes de réglage précis et de fonction. Veuillez vous reporter à notre catalogue pour connaître le centre Chevrolet Performance autorisé...
  • Página 9 5) Collier de serrage d'échappement de 3 po (qté : 1) 6) Collier de serrage d'échappement de 2,25 po (qté : 3) 7) Emblème Chevrolet Performance (qté : 1) – non représenté 8) Fiche de pose (qté : 1) – non représentée Remarque : Veuillez confirmer que toutes les pièces sont présentes avant de commencer à...
  • Página 10 84578425 IR 22MY18 Gen 6 Camaro 4 Cylinder (LTG) PART NO. Chevrolet Performance Exhaust – SHEET DATE REVISION AUTH ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11 WHITE 16 POUND BOND PAPER.
  • Página 11 (1). Ne pas serrer le collier de serrage. 84578425 IR 22MY18 Gen 6 Camaro 4 Cylinder (LTG) PART NO. Chevrolet Performance Exhaust – SHEET DATE REVISION AUTH ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11 WHITE 16 POUND BOND PAPER.
  • Página 12 Si l'embout est trop reculé, il existe un risque de contact en chargeant ou en déchargeant le coffre. 84578425 IR 22MY18 Gen 6 Camaro 4 Cylinder (LTG) PART NO. Chevrolet Performance Exhaust – SHEET DATE REVISION AUTH ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11 WHITE 16 POUND BOND PAPER.
  • Página 13 84578425 IR 22MY18 Gen 6 Camaro 4 Cylinder (LTG) PART NO. Chevrolet Performance Exhaust – SHEET DATE REVISION AUTH ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11 WHITE 16 POUND BOND PAPER.
  • Página 14 84578425 IR 22MY18 Gen 6 Camaro 4 Cylinder (LTG) PART NO. Chevrolet Performance Exhaust – SHEET DATE REVISION AUTH ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11 WHITE 16 POUND BOND PAPER.
  • Página 15 Las partes de Chevrolet Performance están diseñadas, desarrolladas y probadas para exceder sus expectativas de ajuste y función. Por favor consulte nuestro catálogo respecto al Centro Autorizado de Chevrolet Performance más cercano a usted o visite nuestra página en Internet www.chevroletperformance.com.
  • Página 16 5) Abrazadera de escape de 3" (Cant.: 1) 6) Abrazadera de escape de 2.25" (Cant.: 3) 7) Emblema Chevrolet Performance (Cant.: 1) – No mostrado 8) Hoja de instalación (Cant.: 1) – No mostrado Nota: Por favor confirme que todas las partes estén presentes antes de comenzar la desinstalación del sistema de escape de fábrica y la instalación del sistema de escape de desempeño.
  • Página 17 84578425 IR 22MY18 Gen 6 Camaro 4 Cylinder (LTG) PART NO. Chevrolet Performance Exhaust – SHEET DATE REVISION AUTH ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11 WHITE 16 POUND BOND PAPER.
  • Página 18 (1). No apriete la abrazadera. 84578425 IR 22MY18 Gen 6 Camaro 4 Cylinder (LTG) PART NO. Chevrolet Performance Exhaust – SHEET DATE REVISION AUTH ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11 WHITE 16 POUND BOND PAPER.
  • Página 19 Si la punta está demasiado hacia atrás, la punta puede hacer contacto fácilmente cuando cargue o descargue la cajuela. 84578425 IR 22MY18 Gen 6 Camaro 4 Cylinder (LTG) PART NO. Chevrolet Performance Exhaust – SHEET DATE REVISION AUTH ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11 WHITE 16 POUND BOND PAPER.
  • Página 20 Además, si el vehículo no tiene el Paquete de moldura de accesorios de carrocería (incluyendo efectos de suelo trasero), se debe instalar/utilizar el juego de Escape de Chevrolet Performance sin puntas de cromo. 10. Ubicaciones de tuerca de ménsula de soporte: Una vez que la punta esté alineada al frente/atrás, apriete dos tuercas (1) en la ménsula del soporte trasero como se muestra.
  • Página 21 84578425 IR 22MY18 Gen 6 Camaro 4 Cylinder (LTG) PART NO. Chevrolet Performance Exhaust – SHEET DATE REVISION AUTH ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11 WHITE 16 POUND BOND PAPER.