Error Codes - Philips SpeedPro Max FC6813/01 Manual De Instrucciones

Error codes

Error code
E1
E4
E6
E7
SE
Meaning
The appliance is stored or charged at a temperature below 5°C. Move the
appliance to a warmer room. Do not store or charge the appliance at a
temperature below 5°C or above 40°C.
The roller brush in the motorized floor nozzle or in the mini turbo brush has
become blocked and cannot turn freely. Switch off the appliance and check
the roller brush for obstructions.
No current passes through the adapter.Check if the adapter is inserted into the
wall socket properly. If the adapter is inserted properly and the charging disk
(magnet) is attached properly and the appliance does not start to charge, the
adapter may be defective. In that case, please contact the Consumer Care
Center or take the appliance to an authorized Philips service center.
You use the wrong adapter. Connect the correct adapter. If the correct adapter
does not work, please contact the Consumer Care Center or take the appliance
to an authorized Philips service center.
Please take the appliance to an authorized Philips service center.
English
13