Installing The Psu; Removing The Front Fascia; Installing An Odd; Installing Ssds And Hdds - Corsair CARBIDE Serie Guia De Instalacion

SPEC-02
5. Installing the PSU (Power Supply Unit)
Position the PSU on the
bottom of the case then align
the case holes and secure the
PSU with screws provided with
your power supply.

6. Removing the Front Fascia

To remove the front fascia
(front panel), grasp the tab
located at the bottom fascia
and pull outward.
7
carbide spec-02
carbide spec-02
STEP 06 / sl
STEP 06 / sl
7. Installing an ODD (Optical Disk Drive)
First, remove the front panel
5.25" drive bay cover then
slide the ODD into the drive
bay until the tool-free latch
clicks, securing the drive. To
release an optical drive, push
in the tool-free tab then pull
the drive outward.
carbide spec-02
STEP 08
Second
carbide spec-02
STEP 08

8. Installing SSDs and HDDs

Simply pull back retention arm
and slide in the 2.5" SSD or
3.5" HDD until the retention
arm snaps back into place.
First
8