Adjusting The Volume - Fusion Apollo MS-WB670 Manual De Inicio Rápido

Dial • Turn to adjust the volume.
• Turn to move through the menus or adjust a setting.
• Press to make a selection.
• Press to turn on the remote control.
• Press to mute and un-mute the audio.
• Press and hold to open the POWER OFF menu.
NOTE: The stereo turns on and off when you turn the connected remote control on
or off.
• Press to open the menu.
• Press to return to the previous screen from the menu.
• Press and hold to exit the menu.
Press to select a source.
TIP: You can turn the dial to browse, and press the dial to select the source.
Press and hold to open the GROUPS menu.
• Press to tune to the previous station.
• Press to skip to the beginning of the track or to the previous track.
• Press to pause or resume the current track.
• Press to cycle through the tuning modes (auto, manual, and presets).
• Press to tune to the next station.
• Press to skip to the next track.
Quick Start Manual
Naming the Device
You should enter a unique name for this device so you can easily identify it when
viewing devices on the Fusion PartyBus
NOTE: You can also name and disable unused zones and sources on the stereo.
See the owner's manual for more information.
1
Select > SETTINGS.
2
Select the device to rename.
3 Select DEVICE NAME, and enter a unique name for the device.
Setting the Home Zone
The home zone is the speaker zone that you adjust by default when you turn the
dial on the remote control.
1
Select > SETTINGS.
2
Select the name of the remote control you plan to use with this stereo.
3
Select ASSIGN HOME ZONE.
4
Select a zone.

Adjusting the Volume

Using this remote control, you can control the volume of any zone on any stereo
connected to the Fusion PartyBus network.
1
Turn the dial to adjust the volume for the home zone on the stereo.
2
If necessary, press the dial to switch between zones.
NOTE: If a stereo is part of a group, you can adjust the volume of all stereos
in the group or individual zones on each stereo (page 3).
TIP: You can press and hold the dial to adjust the subwoofer level of a zone.
Creating or Editing a Group
Before you can create a group, you must connect multiple compatible stereos to
the Fusion PartyBus network. See the installation instructions provided with your
stereo for installing and configuring the network.
network.
™
3