Publicidad
Idiomas disponibles
Idiomas disponibles
Instructions for use
S et the saw blade protection to leave just enough
space for the workpiece to be fed along the saw
blade.
S witch the machine on before the saw blade
touches the workpiece.
H old the workpiece with both hands and slowly
feed it along the saw blade.
D o not exert pressure on the saw blade. Allow the
machine enough time to cut through the workpiece.
B est results are achieved with workpieces up to
approx. 2.5 cm.
W orkpieces thicker than approx. 2.5 cm should be
fed along the
saw blade very slowly. Be extra careful not to bend
the saw blade.
T o maintain optimum efficiency, replace a worn
saw blade in time.
Switching on and off (fig. A)
This machine is equipped with a no-volt release
feature.
This feature avoids that the machine is accidentally
switched on when the plug is inserted into the mains
outlet.
T o switch the machine on, set the on/off switch (1)
to 'I'.
T o switch the machine off, set the on/off switch (1)
to '0'.
Lubrication (fig. F & G)
R egularly apply a drop of oil to lubricate the guide
rollers on the saw blade guides.
CLEANING AND MAINTENANCE
The machine does not require any special
maintenance.
R egularly clean the ventilation slots.
R egularly remove sawdust from the housing and
the wheel case.
TECHNICAL DATA
Mains voltage V
Mains frequency Hz
Power input W
No load speed min-1
Max. cutting depth mm
Saw table dimensions mm
Weight kg
LpA (sound pressure) dB(A)
Take appropriate measures for the
protection of hearing.
GUARANTEE
Refer to the enclosed guarantee conditions for the
terms and conditions of guarantee.
ENVIRONMENT
Should your machine need
replacement after extended use,
do not put it in the domestic
waste but dispose of it in an
environmentally safe way.
230
50
550
12.1m/sec
40
240 x 200
11
< 65
Made in China
2009
14
Publicidad
