RedMax BCZ350S Manual De Instrucciones página 10

BCZ350S
3. For safe operation
■ Maintenance
1. In order to maintain your product in proper working order,
perform the maintenance and checking operations described in
the manual at regular intervals.
2. Always be sure to turn off the engine and disconnect the spark
plug before performing any maintenance or checking
procedures.
WARNING
The metallic parts and engine cover reach high temperatures
immediately after stopping the engine.
3. Examine the product at intervals for loose fasteners and rusted
or damaged parts. Use special care around the fuel line, the
muffler, and the ignition wiring.
4. When replacing the any other part, or any lubricant, always be
sure to use only RedMax products or products which have been
certified by RedMax for use with the RedMax product.
5. In the event that any part must be replaced or any maintenance
or repair work not described in this manual must be performed,
please contact a representative from the store nearest RedMax
authorized servicing dealer for assistance.
6. Do not use any accessory or attachment other than those
bearing the RedMax mark and recommended for the unit.
7. Under no circumstances should you ever take apart the product
or alter it in any way. Doing so might result in the product
becoming damaged during operation or the product becoming
unable to operate properly.
■ Disposal
When disposing your machine, fuel or oil for the machine, be sure
to allow your local regulations.
■ Machine's safety equipment
This section describes the machine's safety equipment, its
purpose, and how checks and maintenance should be carried out
to ensure that it operates correctly. See the "Parts location"
section to locate where this equipment is positioned on your
machine.
The life span of the machine can be reduced and the risk of
accidents can increase if machine maintenance is not carried out
correctly and if service and/or repairs are not carried out
professionally. If you need further information please contact your
nearest service workshop.
IMPORTANT
All servicing and repair work on the machine requires special
training. This is especially true of the machine's safety equipment.
If your machine fails any of the checks described below you must
contact your service agent. When you buy any of our products we
guarantee the availability of professional repairs and service. If the
retailer who sells your machine is not a servicing dealer, ask him
for the address of your nearest service agent.
WARNING
• Never use a machine with faulty safety equipment. The
US-8
machine's safety equipment must be checked and
maintained as described in this section.
• If your machine fails any of these checks contact your
service agent to get it repaired.
1. Throttle lockout
The throttle lockout is designed to prevent accidental operation
of the throttle control. When you press the lock (A) (i.e. when
you grasp the handle) it releases the throttle control (B). When
you release the handle the throttle control and the throttle
lockout both move back to their original positions. This
movement is controlled by two independent return springs. This
arrangement means that the throttle control is automatically
locked at the idle setting.
B
Make sure the throttle control is locked at the idle setting when
the throttle lockout is released.
Press the throttle lockout and make sure it returns to its original
position when you release it.
Check that the throttle control and throttle lockout move freely
and that the return springs work properly.
A