Key To Symbols; Emission Control - RedMax BCZ350S Manual De Instrucciones

BCZ350S

2. Key to symbols

Symbols
WARNING! Clearing saws, brushcutters and
trimmers can be dangerous! Careless or
incorrect use can result in serious or fatal
injury to the operator or others. It is extremely
important that you read and understand the
contents of the operator's manual.
Please read the operator's manual carefully
and make sure you understand the
instructions before using the machine.
Always wear:
• A protective helmet where there is a risk of
falling objects
• Approved hearing protection
• Approved eye protection
Max. speed of output shaft, rpm
This product is in accordance with applicable
EC directives.
Watch out for thrown objects and ricochets.
The operator of the machine must ensure,
while working, that no persons or animals
come closer than 15 metres.
Machines fitted with saw blades or grass
blades can be thrown violently to the side
when the blade comes into contact with a
fixed object. This is called blade thrust. The
blade is capable of amputating an arm or leg.
Always keep people and animals at least 15
metres from the machine.
Arrows which show limits for handle
positioning.
Always wear approved protective gloves.
Wear sturdy, non-slip boots.
Only use non-metallic, flexible cutting
attachments, i.e. trimmer heads with trimmer
cord.
US-4
Noise emission to the environment according
to the European Community's Directive. The
machine's emission is specified in chapter
Technical data and on label.
Starting instructions
Other symbols/decals on the machine
refer to special certification requirements
for certain markets.
The engine is s witched off by moving the
stop switch to the stop position.
CAUTION! The stop switch automatically
returns to the start position. In order to
prevent unintentional starting, the spark plug
cap must be removed from the spark plug
when assembling, checking and/or
performing maintenance.
Always wear approved protective gloves.
Regular cleaning is required.
Visual check.
Approved eye protection must always be
used.

■ EMISSION CONTROL

An emission control label is located on the engine.
1: The year will be changed every year of manufacturing.
2: The initial will be changed every year of manufacturing.
3: SN : Sealed tank made of Nylon.