Rear Panel - Yamaha A-S1100 Manual De Instrucciones

Controls and functions

■ Rear panel

2
See page 16 for connection information.
1 PRE OUT jacks
y
• The PRE OUT jacks output the same channel signal as the
SPEAKERS L/R CH terminals.
• When you connect a stereo cable to the PRE OUT jacks to
drive the speakers using an external amplifier, it is not
necessary to use the SPEAKERS L/R CH terminals.
• The signal output at the PRE OUT jacks are affected by the
BASS and TREBLE control settings.
2 SPEAKERS L/R CH terminals
3 TUNER input jacks
4 PHONO input jacks
5 CD input jacks
10
En
3 4 5 6
6 MM/MC switch
Selects the type of cartridge of the turntable connected
to the PHONO jacks.
MM: Choose this setting if the connected turntable
uses an moving magnet (MM) cartridge.
MC: Choose this setting if the connected turntable
uses an moving coil (MC) cartridge.
y
When you replace the cartridge, be sure to turn off this unit.
7 GND (Ground) terminal
8 LINE 1 input jacks
9 LINE 2 jacks
PB (playback) input jacks and REC (recording) output
jacks are provided.
7 8 9
1
0