Operation - CAPITAL SPORTS Infinity Track 6.0 Touch Manual De Instrucciones

EN
56

OPERATION

Changing speed from miles to kilometers
1. Pull out the safety key, press the PROGRAM and MODE keys at the same
time. If the speed show 0.6, the speed is in MPH.
2. Pull out the safety key, press the PROGRAM and MODE keys at the same
time. If the speed show 1.0, the speed is in KMH
Safety key function
In any state, pull-out safety locks, window displays:"E7" and sound buzzer "DI-
DI-DI". Then put well the safety lock, all show that the full light for 2 seconds,
then go to manual start mode.
Start
• Put the power cord into the electrical outlet with 10A. Flip this switch to
the "ON" position. The screen shines with prompt sound.
• Put the safety key on the correct position ,then turn on the power ,the
LCD window light flash,and sound "beee", the treadmill enter in to the P0
Normal Mode.
• Press "PROG" key to cycle select the program P0-P36, U01-U03, FAT.
• P0 is User program. Press "MODE" cycle select four training mode. User
can select the speed and inclination. Speed default is 1.0 km/h, inclination
default is 0%.
Training mode 1: Counting time, distance, calorie is plus. The select
function is closed.
Training mode 2: Time Countdown. Under selecting, time window flash,
press "+" or "-" to modify the value. The range is 5-99 minute. Default is
30:00 minutes.
Training mode 3: Calories Countdown. Under selecting, calories window
flicker, press "+" or "-" to modify the value. The range is 20-990 CAL.
Default is 50 CAL
Training mode 4: Distance Countdown. Under selecting, Distance window
flash, press "+" or "-" to modify the value. The range is 1.0-99.0 km. Default
is 1.0 km.