Normal Function - Manta SPK5007 Manual De Usuario

Normal function

1. Be sure to switch off the power and to connect to corresponding input jacks.
2. Turn on the power and wait 3-4 seconds untill the speaker functions are connected.
3. Select an audio source by pressing the INPUT A key on the front panel to display
AUX A, BT-A, FM, USB A. Press the INPUT B key on the front panel to display LINE,
USB B.
4. Adjust the VOLUME/MULTI knob on the front panel or the VOL+/- key on the remote
control to adjust the setting of the main volume. Then turn the left push shot to adjust
the volume of USB A, turn the right push shot to change the volume of the USB B.
5. Press the MENU key on the front panel to display BASS, TREBLE, XDRIVE,AUTO,
MAIN then adjust the VOLUME knob to change music treble,bass,light mode and
sound effect.
6. Press the DJ button on the front panel to display SCRATCH,REVERB,BEAT BOX,
YEAH, DJ OFF mode,then adjust the DJ knob to design and change the music effect
as you like.
7. Press the LIGHT button on the remote control or press the MENU button on the front
panel to display light mode,then press the VOLUME/MULTI knob to change the
OFF,R,G,B,RG,RB,GB,RGB, AUTO,DEMO light mode.
8. Press the MUTE key to mute, press it again to reset. Press X Drive on the remote to
turn on/off X-Bass effect.
L ig h t c o lo r c o n t r o l f u n c t io n
To control the light modes coming from the speaker panels by "Speaker" menu or "light
model" button on remote control
R = red lights flash
●
G = green lights flash
●
B = blue lights flash
●
RG = red and green lights flash
●
RB = red and blue lights flash
●
GB = green and blue lights flash
●
RGB = red, green, and blue lights flash
●
Auto = the various color combinations cycle through and flash.
●
Demo = lights flash and change color as if they were responding to the beat of the music.
●
Tu n e r a p p l i c a t i o n s
1.Before using the radio functions, you must attach the supplied antenna. Adjust the
antenna to obtain optimum reception.
Press the INPUT A key on the front panel(amplifier)or the FM key on the remote control,
to select FM function.
＂ ＂
2. Press the CH+/CH- key on the remote control to find radio bands that you have previously
saved .
3. Press or hold the TU+/TU- key on the remote control to adjust the radio frequency manually.
4. Press the AUTO key on the remote control, the machine will scan radio channels from
low-frequency to high-frequency by itself and memorize the channels one by one.
User's Manual
15
E N