Publicidad
BDA 29954_Layout 1 29.03.11 13:27 Seite 5
Troubleshooting
Problem
Bad reception oder
or no reception
Moderate reception
Technical data:
ntenna
VHF Frequency Range:
UHF Frequency Range:
Polarisation:
ntenna adapter:
Input voltage:
Input current:
Power supply
Input voltage:
Output voltage:
Output current:
Stand-by consumption:
Operating temperature:
Hereby Vivanco GmbH declares that TV 501 is in conformity with the fundamental requirements
and other relevant regulations of the directive 2004/108/EU.
Disposal of the device
This device may not be disposed along with household waste. Please hand it over to a collection
point for electrical devices of your area or your district. Thus it will be guaranteed that the old
devices are recycled properly and economically and potential environmental and health hazards
are avoided.
The packing should be supplied to re-use. Please do not throw it into household waste and
handle it in conformity with local disposal rules.
Possible cause
ntenna is not connected
to a power supply
Cable connection broken
ntenna is not aligned properly
Inconvenient position of the
antenna was selected
There is no sufficiently strong
transmitter in the vicinity
174-230 MHz
470-862 MHz
Vertical and horizontal
5/6 V
50m
230 V~ 50 Hz, Euro plug
6 V
50m
<0,3 W
-20...45 °C
Solution
Ensure power supply
Check if all the plug
connections are plugged in
properly
By doing fine adjustment of
the position (tilting and turning)
the reception can be optimised.
Please ask beforehand in
which direction the trans-
mission antenna is located
Install the antenna in another
position
Please check with your
provider if you are in the range
of the transmission antenna
GB
5
Publicidad
