Suzuki DL650A L2– Installation Instructions página 5

5. Insert the lead wires of the LH
handle switch coupler, which
were pulled out in step 4, into
the 4-Way Housing (M) H and
4-Way Housing (F) I.
Refer to picture for the insert
position of each lead wire.
("sky blue 1" and "sky blue 2" is
inserted in the upper cell)
NOTICE
Be careful to distinguish the
lead wire "sky blue 1" & "sky
blue 2".
6. Connect the
housing of the LH handle switch
coupler which were discon-
nected in step 3.
Connect 4-Way Housing (M) H
and 4-Way Housing (F) I.
7. Reinstall the LH handle switch
coupler into the original place
on the Radiator heat shield.
8. Reinstall the parts which were
removed in step 1 in the
reverse order of removal.
4-Way Housing (M) H
Sky blue 2 Sky blue 2
Black Black
NOTICE: NOTICE:
Insert the terminal until a click is felt. Insert the terminal until a click is felt.
4-Way Housing (F) I
Sky blue 1 Sky blue 1
Light green Light green
NOTICE: NOTICE:
Insert the terminal until a click is felt. Insert the terminal until a click is felt.
Male/Female
4-Way Housing (M) H 4-Way Housing (M) H
GENUINE SUZUKI ACCESSORIES
Sky blue 1 Sky blue 1
Light green Light green
Standard LH handle switch coupler Standard LH handle switch coupler
5/10
Sky blue 2 Sky blue 2
Black Black
4-Way 4-Way
Housing (F) I Housing (F) I