Operations - Yamaha ATS-930 Manual De Instrucciones

Operations

Preparing the remote control
Peel off the protection sheet before use.
Operating range of the remote control
Remain within the operating range shown below.
Remote control sensor
Indicators
The indicators on the front panel flash or light up, to
indicate the operation and setting status.
8
En
Input keys
Select an input source to be played back.
TV ....................TV audio
BD/DVD ...........Audio from a device connected to
the BD/DVD input jack
COAXIAL.........Audio from a device connected to
the COAXIAL input jack
ANALOG .........Audio from a device connected to
the ANALOG input jack
The indicator for the selected input source lights up.
(Example: when TV is selected)
HINT
• To play audio of the playback device connected to the TV or
to watch videos of the playback device, set the TV's input
source to the playback device.
SUBWOOFER keys (+/-)
Adjust the volume of the subwoofer.
Within 6 m
(20 ft)
Volume down (–)
VOLUME keys (+/-)
Adjust the volume of the sound bar.
Volume down (–)
★
LEARN key
Sets the sound bar to the TV's remote control
learning mode (p.10).
Remote control signal transmitter
1
Transmits infrared signals.
2
Volume up (+)
★: the AUDIO DELAY,
LEARN, and
Volume up (+)
REPEATER keys
require 3-second press.
REPEATER key
Enables/disables the TV Remote Repeater
function (p.12).
★
★
3
★