Warranty; Thermostats - nvent RAYCHEM QuickNet Instrucciones De Instalación

WARRANTY

nVent offers a 12 year Total Care Warranty for QuickNet.
Please check the Total Care Warranty Certificate and
Registration Form (included in the Commissioning form or
downloadable from www.nVent.com/RAYCHEM) for more
details. The commissioning form has to be fully filled out
during the installation and approved by a qualified electrician. The
commissioning form should be kept by the owner of the building
in order to comply with electrical regulations and the Total Care
Warranty conditions.
In order to ease up the identification of the product, a product
identification sticker is included in the box and can be attached to the
commissioning form.
THERMOSTAT
As QuickNet is a constant wattage electrical underfloor heating mat,
it is mandatory to have it controlled by a thermostat that is regulating
the temperature by the use of an external floor temperature senor.
Alternatively, QuickNet can be controlled by a nVent RAYCHEM
thermostat working in room temperature sensing mode, but with a floor
sensor temperature limiter. QuickNet shall be installed in combination
with a thermostat that makes the product compliant with the Eco Design
directive such as the NRG-DM, Green Leaf or SENZ WIFI.
Ecodesign compliant
Week Timer
Predictive heating
Open Window
Distance Control
It is recommended to install the sensor cable in a conduit (included),
so that it is possible to replace a defective sensor easily. The conduit
must be sealed properly by means of the cap (included). The sensor
itself should be located close to the surface immediately under floor
tiles or other floor covering and should be positioned centrally between
two heating cables. Strive for a positioning of the floor sensor as close
as possible to the top floor surface for best temperature control. When
installing two heating mats, the sensor should be positioned between
these two mats.
4 | nVent.com/RAYCHEM
NRG-DM
X
X
GREEN
LEAF
X
X
SENZ
WIFI
X
X
X
X