nvent RAYCHEM QuickNet Instrucciones De Instalación página 6

Fig A: 1 Floor covering (can be tile or natural stone)
2 Tile glue
3 (Waterproofing layer – optional for shower areas)
4 (Filler material – Optional)*
5 QuickNet + Floor sensor inserted in sensor tube
6 Primer (optional)
7 Sub floor
8 Insulation
9 Bearing construction
Fig B: 1 Floor covering (can be tile or natural stone)
2 Tile glue
3 (Waterproofing layer – optional for shower areas)
4 (Filler material – Optional)*
5 QuickNet + Floor sensor inserted in sensor tube
6 Primer (optional)
7 Gypsum plasterboard ≥13mm
8 Wooden plate
9 Joist and insulation layer between the joists
Fig C: 1 Floor covering (Parquet floor)
2 Glue
3 (plywood – Optional)
4 Filler material (between 15 and 30mm of filler material)
5 QuickNet + Floor sensor inserted in sensor tube
6 Primer (optional)
7 Sub floor
8 Insulation
9 Bearing construction
6 | nVent.com/RAYCHEM