KTM 90512935044 Manual Del Usuario página 6

6

- Pull plug for reed switch

- Bond the reed switch (scope of supply) to the intended
position.
- Connect plug-in connection
Route the cable properly and secure with a cable binder. En-
sure that the cables are not kinked or pinched. Check the cable
routing to ensure that there is no chafi ng.
- Position the reed magnet (scope of supply) on the holes
provided in the passenger seat.
- Mount and tighten the tapping screws
Final steps
- Mount the passenger seat.
- Mount the seat.
- Perform functional test (acc. to alarm system instruction
manual).
out of wiring harness.

.

(scope of supply).