PRODUCT
SETUP
QUICK INSTALLATION
4
1. Plug the power adapter into the receptor
located on the back of the DUB-H4. Plug
the other end into a wall outlet. The LED on
the DUB-H4 will turn green to indicate that
the hub is receiving power.
2. Plug the smaller (Mini-B USB) end of the
included USB cable into the back of the
DUB-H4.
3. Plug the Type A connector end of the
included USB cable into an available USB
port on your computer.
4. Your computer will automatically detect
and install the drivers for the DUB-H4. You
may now connect USB 2.0 or USB 1.1
devices to any available USB port on the
front of the DUB-H4.
DUB-H4