D-Link DUB-H4 Guía De Instalación Rápida página 5

FAST-CHARGE MODE
CHANGING FROM STANDARD MODE TO FAST-CHARGE MODE
• Standard Mode: When the DUB-H4 is connected to a computer
that is powered on, the DUB-H4 will enter Standard Mode. In this
mode, a connected iPad may display a "Not Charging" status,
and will charge its battery very slowly. If the power adapter is not
connected to the DUB-H4, the hub will draw power from your PC's
USB port, affecting the speed and ability of your iPad to charge its
battery.
• Fast-Charge Mode: When the DUB-H4 is not connected to a
computer or is connected to a computer that is powered off or in
standby/sleep mode, all USB ports will supply additional power to
effectively and quickly charge an iPad. Please note that in order
to use Fast-Charge Mode, the DUB-H4 must also be connected
to the power adapter, and the LED on the hub must be lit green to
indicate it is receiving power.
Notes:
1. We suggest the total combined power draw of 4 ports does not
exceed 10 W or 2 A.
2. The actual charge capacity provided is dependent on attached
device needs.
3. The iPad_Charge.exe program is only available for Windows OS.
®
iPAD SYNC
CHARGING AND SYNCING YOUR IPAD
®
For iPad models with a 30-pin port, if you want to charge and sync
®
your iPad simultaneously when it is connected via the DUB-H4 to a
Windows computer, go to the Product Support page for the DUB-H4
on www.dlink.com and download the iPad_Charge.exe program onto
your computer. Once you've installed this program, you'll be able to
sync and charge your iPad
®
Note: iPad is a registered trademark of Apple Inc.
DUB-H4
®
simultaneously.
®
AT THE SAME TIME
5