CARE 50523 Manual Del Usuario página 8

count down from "00 60", Pulse signal will be blinking according user's heart rate BPM. When Time counts
down to "0", it will show F1~F6.
(2)LCD display as follows: (RECOVERY start condition & end
(3)If the count down action to 00:00 is not completed and there is no pulse signal, the count down action has to be
done and shown F6.
(4)If you press the RECOVERY button prior to count down to 00:00, it will be end the function and there will be no
display at all.
FUNCTIONS
SCAN: Displays all function from RPM→SPEED→DISTANCE→CALORIES→PULSE in sequence.
RPM: Displays the pedaling Rotation Per Minute. The RPM and SPEED will switch to another display in every 6
seconds after exercise starts.
SPEED: Displays the user's exercise speed.
TIME: 1.You can press Up / Down button to set target time between 00:00 to 99:00 for count down function.
2.It can be set up by the user or accumulated automatically for count up function.
DISTANCE: 1.Your can press UP/Down button to set target distance between 00:00 to 99:00 for count down
function.
2. It can be set up by the user or accumulated automatically for count up function.
CALORIES: 1.You can press Up / Down button to set target calories between 00:00 to 99:00 for count down
function.
2. It can be set up by the user or accumulated automatically for count up function.
TARGET PULSE 1. Presses Up / Down button to input your AGE, then the computer will set up a pulse value
automatically. And when you exercise for a while, the screen will show the pulse percentage
55%, 75% and 90% be blinking signal if you reach that percentage of pulse value. This is to
remind you the target percentage you have achieved when you are exercising.
TEMPERATURE: Displays current room temperature .
CALENDAR: You can set current calendar including year, month, date, and it will show up after the monitor
stops working for around 4 minutes.
CLOCK: Displays time from 00:00 to 23:59 (24 hours mode) together with Calendar data after the monitor
stops training for 4 minutes.
BODY FAT In STOP mode, press the BODY FAT button to start body fat measurment.
The selected user (U1~U9) will blinking for 2 seconds. Then start measuring.
During measuring, user have to hold both hands on the handgrip. And the LCD will display "--" "--" for
8 seconds until computer finish measuring.
LCD will display BODY FAT advice symbol, BODY FAT percentage, BMR, BMI for 30 seconds.
<REFERENCE>
B.M.I. (Body mass index) integrated
B.M.I
SCALE
RANGE
BODY FAT:
SYMBOL
FAT%
SEX
MALE
FEMALE
LOW LOW/MED
<20 20-24
—
LOW LOW/MED
<13% 13%-25.9%
<23% 23%-35.9%
MEDIUM MED/HIGH
24.1-26.5 >26.5
▲
MEDIUM MED/HIGH
26%-30% >30%
36%-40% >40%
◆