Oven Start Up And Use; Command Pannel Description; First Lighting Of The Oven; Start Up Fase - GGMgastro PEP Manual De Instrucciones

3

OVEN START UP AND USE

COMMAND PANEL DESCRIPTION
1. Main switch ;
2. Cooking chamber light switch ;
3. Analogic thermometer ;
4. Top thermostat ;
5. Pilot light TOP ;
6. Bottom thermostat ;
7. Pilot light thermostat ;

FIRST LIGHTING OF THE OVEN

At the first use of the appliance it is advisable to heat the empty oven to eliminate bad smells
caused by the refractory stones evaporation and the inner metallic parts.
Procedure:
- fully open the exhauster valve;
- turn the main switch in position "1";
- leave the oven working (empty) for at least 8 hours at the temperature of 300° before
proceeding to the first baking.
START UP PHASE
The analogical thermometer display shows the actual average temperature of the baking
chamber. Rotate the thermostat knobs and until the expected temperature. In this way top
and bottom heating elements are under working and the relevant light signals switch on.
USE OF EXAUSTER VALVE
While baking regulate the valve according to the exingencies.
oven is under heating; so, the set temperature is reached in shortest possible time.
- 25 -