LG LSEL6337 Serie Manual Del Propietário página 70

us_main.book.book Page 70 Wednesday, February 3, 2021 9:14 AM
70 TROUBLESHOOTING
Problem
Areas of Food spillovers not cleaned before next use.
discoloration on the
• See the "Glass-Ceramic Cooktop" section in the MAINTENANCE chapter.
cooktop
Hot surface on a model with a light-colored cooktop.
• This is normal.The surface may appear discolored when it is hot. This is temporary and will
Frequent cycling on The element will cycle on and off to maintain the heat setting.
and off of surface
• This is normal.
units
Scratches or Coarse particles such as salt or sand between cooktop and utensils can cause
abrasions on scratches.
cooktop surface
• Be sure the cooktop surface and bottoms of utensils are clean before using. Small
Cleaning materials not recommended for glass-ceramic cooktop have been used.
• See the "Glass-Ceramic Cooktop" section in the MAINTENANCE chapter.
Cookware with rough bottom has been used.
• Use smooth, flat-bottomed cookware.
Metal marks Scraping of metal utensils on cooktop surface.
• Do not slide metal utensils on cooktop surface. Use a glass-ceramic cooktop cleaning
Brown streaks or Boilovers are cooked onto surface.
specks
• Use a blade scraper to remove soil. See the "Glass-Ceramic Cooktop" section in the
Areas of Mineral deposits from water and food.
discoloration on
• Remove using a glass-ceramic cooktop cleaning creme. Use cookware with clean, dry
cooktop
Oven control beeps Electronic control has detected a fault condition.
and displays any F
• Turn off the oven function you are using to clear the display and stop beeping. Reprogram
code error.
Displayed colon in This means that the product has just been plugged in, or that it has experienced a
the clock is flashing power interruption.
• This is normal. Reset the clock or press any key to stop the flashing.
CLEAN and door The Self Clean cycle has been selected, but the door is not closed.
flash in the display
• Close the oven door.
(On some models)
Loc is on in the The oven is locked because of the Control Lock feature.
display when you
• Deactivate the Cotrol Lock feature.
want to cook (On
some models)
Oven light does not It is time to replace the lamp or the lamp is not tightened enough.
work.
• Replace or tighten lamp. See "Changing the Oven Light" section in this Owner's Manual.
Convection fan Convection fan stops during a convection bake cycle. It is done to allow for more even
stops. (During heating during the cycle.
Conv.Bake mode)
• This is not a failure of the range and should be considered normal operation.
Fan operation This is to ensure even baking results.
(During Bake mode)
• It is normal for the fan to operate periodically throughout a normal bake cycle in the oven.
disappear as the glass cools.
scratches do not affect cooking and will become less visible with time.
creme to remove the marks. See the "Glass-Ceramic Cooktop" section in the
MAINTENANCE chapter.
MAINTENANCE chapter.
bottoms.
oven. If fault recurs, record fault number and contact a Service agent.
Possible Cause & Solution