Publicidad
Idiomas disponibles
Idiomas disponibles
Safety Instructions:
Non-compliance with the safety instructions can result in danger both to persons and to the
environment and the equipment. Non-compliance with the safety instructions can lead to the
loss of any claims for damages. The operator of the equipment must ensure that the
contents of the Operating Instructions, particularly the Safety Instructions are known to the
operating personal.
The pressure in the air feed line must not exceed 8 bar.
-
-
Before any repair or maintenance work, the air connection should be loosened and the oil
pressure released from the outlet hose by operating the trigger on the gun.
Never point the oil filler gun at people or animals! Danger of injury!!
-
The use of not original accessory components e.g. hoses and connection fittings can in some
cases give rise to the risk of accidents. No liability can be accepted for accidents or damage
caused by components from other sources.
-
After using the equipment, relieve the pressure in the hose. Disconnect the air feed line and
actuate the oil filler gun again.
-
Protect hoses from damage and the effects of heat.
-
Replace damaged hoses immediately with genuine spare parts.
Modification or alteration to the equipment is only permissible after discussion with the
-
manufacturer.
The operational safety of the equipment is only guaranteed if used in accordance with the
-
directions.
-
Maintenance, inspection and repairs must only be carried out by qualified specialist personnel,
who have acquainted themselves with the subject by studying the operating instructions.
Warranty:
If the operating instructions are complied with and the equipment used in accordance with the
directions, we accept liability within the bounds of the statutory warranty obligation (see our conditions
of delivery).
When making warranty claims always attach the invoice from your dealer, giving the date of purchase.
Your contribution to protecting the environment:
The pertinent regulations for the registration, setting up and operation of equipment for dealing with
materials hazardous to water must always be complied with by the user.
8
Publicidad
