208 Displaying The Events Log - Best Power UNITY/I UT310 Manual Del Usuario

208 Displaying the Events Log

The events log is a list of the last 250 alarms and operational modes. This log includes the time and
date of each event. Most entries in this log will be alarms; see Section 206 for explanations of
the alarms. Other entries describe operating modes; the table below lists these mode messages and
explains what they mean.
TABLE 5 - Log Messages
Main processor unit (MPU) is reset
Stand-by
Normal operation
Bypass operation
Battery operation
Economy operation
1. To access the events log, press both
2. Use the
3. To display the time and date the alarm or other event happened, press
Sample display: 95.12.16
4. If you press
5. To exit the events log, press
Mode
and keys to scroll through the log.
(Year, month, date)
10.22.13 UTC (Hour, minute, second. UTC = Universal Time Coordination.)
after displaying the last event in the log, the display shows "No further event."
What It Means
The UPS was completely switched off.
The UPS was in standby mode. (See Section 202.)
The UPS was in normal operation. (See Section
202.)
The UPS was in bypass operation. (See Section
202.)
The UPS was in battery operation. (See Section
202.)
The UPS was programmed to operate in Economy
mode. (See Section 202.)
and at the same time.
.
22
.