Movement RESIDENCIAL Serie Manual Del Proprietário página 108

OPERATIONAL INSTRUCTIONS
CHARGING SYSTEM
The load of the equipment has the function of making the bicycle pedal lighter or
heavier. The bigger the load, the heavier it will be, the smaller the load, the lighter the
bike will be. The load can be adjusted according to the user's training level. In
conjunction with the load selector, the rotation of the pedals also influences the desired
load, the higher the rotation of the pedals, the load increases proportionally.
LOAD SELECTION
To select the desired load, simply rotate the LOAD
SELECTOR clockwise to increase the load, and
counterclockwise to decrease the load. At each
movement the LOAD SELECTOR will emit a sound to
indicate that the load is being selected.
SEAT
The seat can be adjusted to better fit the user.
SEAT ADJUSTMENT V2
To adjust the V2 seat, simply unscrew the knob and lower
or raise the seat. When you find the point you want to pin
the seat on, just release the selector pin and screw in to
lock the seat in the desired position.
SEAT ADJUSTMENT H2
To adjust the H2 seat, simply rotate the knob in the center
of the chassis. With the knob released, move the chassis
forward or backward until you find the optimal setting.
To lock the chassis, rotate the knob until it locks.
SERIAL NUMBER LOCATION
To facilitate your service, always have the equipment's
serial number ready. The position of the serial number is
the same for both bikes and the elliptical.
48